Asphalt Crack Filler is a modern day advancement in the way pavement cracks are sealed, enabling fast efficient repairs to large areas and tight restricted sections. FEATURES: Solvent free and non flammable Free of dangerous carcinogenic and toxic odours Cold application without heating requirements or OHS hazards Fast drying properties Excellent adhesion and penetrating properties to Asphalt, bitumen and concrete surfaces Excellent crack bridging properties Forms a flexible non tacky film Excellent water and weather resistance Resistant to sulphates, ground salts, diluted acids Trafficable after 10 minutes in normal ambient conditions (20°) Colour: Black Size: 1 Litre USES: Asphalt/concrete road crack sealer and repair compound Bitumen sealing compound for horizontal joints and gaps Sealer between new and existing asphalt layers Waterproof seal in pavement cracks Pourable joint filler on bitumen/asphalt surfaces General sealing and prevention of water ingress into road cracks HOW TO USE: Surface Preparation: Surfaces myst be clean, sound and stable before commencing application Surfaces must be free of sharp protuding materials, loose or de-bonded coatings, curing or release agents, wax residues, foreign particles, laitance, algae and moss, grime, oils, animal fats or grease Structurally unsound layers and surface contaminants are to be removed by abrasive blasting, blast tracking, grinding or similar To ensure good adhesion and successful application, it is recommended that surfaces affected by oil, petroleum, grease residues etc are to be cleaned using a biodegradable degreaser before commencing Steel floated concrete must be treated by abrasive blasting, blast tracking or grinding, followed by water blasting to remove release agents and surface contaminants Coverage: Surfaces must be dry, clean and free of loose foreign matter and debris Coverage will depend on depth and width of crack; as a guide 1 litre will cover approximately 80m length and 2mm width and 5mm depth
