Upgrade your organidation with our versatile Elfa top track. This essential component serves as backbone of the click-in system, providing support for hang standards. The top track features end stops and an upper lip, preventing standards to fall out sideways or upwards. Mounts easily through the oval screw holes to the wall and minimizes the number of wall holes required. Available in different widths and can be to cut. Pair with a top track cover for a polished appearance. When mounting, leave around 3-5 mm space up to the ceiling if you have a top track cover in order to have sufficient room to slide it on. A strong and safe backbone for a flexible storage solution. End stops and an upper lip ensure standards stay in place. Choose from different widths and can be cut to desired width. NB! Hang standards manufactured before 2021 are not compatible with this top track. The top track is the foundation of a top hang system and attaches to the wall horizontally. Top tracks are made from high strength steel and are attached to the wall with screws and/or screws and anchors. There is a safety function in the top of the track – an upper “”lip””, which prevents hang standards to move out of the track upwards. The saftey lip comes with cutouts, in order to more easily thread in the hang standards when mounting. There is also a safety function – “”end stops”” – in either end of the top track, preventing hang standards to move out sideways. The weight of a loaded system pulls the hang standards down securely onto the top track, and presses them back against the supporting wall, increasing stability and durability at the same time. The bore holes in the top track are oval – width 20 mm (6/8”) and height 7,2 mm (2/8”) for easier positioning towards studs etc. The amount of screw holes per top track width are: 936 mm: 7 screw holes Use a top track cover to cover the screw holes in the Elfa top track. The minimum placement from the ceiling is 15 mm, to ensure that there is sufficient space to be able to hang in hang standards. In order to hide the top track visually, the recommended placement of track is in line with (behind) the intended position for the upper shelf. The widths of the top tracks are designed to fit with standard section widths. Elfa Top Tracks are, however, able to be cut when designing a section which differs from the standard widths. Recommendation is to cut the joining top track on the left side in order to keep the end stop at the outer edges of the track. When cutting a top track; make sure to make the cut a minimum 3 mm from a bore hole or cut out on the upper side of the Elfa top track. Maximum load per section is 200 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall. Specifications Elfa top track measurement – 936mm wide 8mm depth 36mm height Package Content 1 x Elfa Top track http://www.completestoragesolutions.com.au/wp-content/uploads/2021/09/Elfa-Click-in-top-hang.mp4 Want to buy now, pay later & have it in your hands quick ? You can use our payment options of either afterpay, latitudepay, humm or zip pay & get it sorted today!
