Upgrade your organisation with our versatile Elfa top track 641mm. This essential component serves as backbone of the click-in system, providing support for hang standards. The top track features end stops and an upper lip, preventing standards to fall out sideways or upwards. Mounts easily through the oval screw holes to the wall and minimises the number of wall holes required. Available in different widths and can be to cut. Pair with a top track cover for a polished appearance. When mounting, leave around 3-5 mm space up to the ceiling if you have a top track cover in order to have sufficient room to slide it on. A strong and safe backbone for a flexible storage solution. End stops and an upper lip ensure standards stay in place. Choose from different widths and can be cut to desired width. NB! Hang standards manufactured before 2021 are not compatible with this top track. The top track is the foundation of a top hang system and attaches to the wall horizontally. The Elfa Top track 641mm is made from high strength steel and are attached to the wall with screws and/or screws and anchors. There is a safety function in the top of the Elfa top track 641mm – an upper “”lip””, which prevents hang standards to move out of the track upwards. The safety lip comes with cutouts, in order to more easily thread in the hang standards when mounting. There is also a safety function – “”end stops”” – in either end of the top track, preventing hang standards to move out sideways. The weight of a loaded system pulls the hang standards down securely onto the Elfa top track 641mm, and presses them back against the supporting wall, increasing stability and durability at the same time. The bore holes in the top track are oval – width 20 mm (6/8”) and height 7,2 mm (2/8”) for easier positioning towards studs etc. The amount of screw holes per top track width are: 641 mm: 5 screw holes Use a top track cover to cover the screw holes in the top track. The minimum placement from the ceiling is 15 mm, to ensure that there is sufficient space to be able to hang in hang standards. In order to hide the Elfa top track 641mm visually, the recommended placement of track is in line with (behind) the intended position for the upper shelf. The widths of the top tracks are designed to fit with standard section widths. Top Tracks are, however, able to be cut when designing a section which differs from the standard widths. Recommendation is to cut the joining top track on the left side in order to keep the end stop at the outer edges of the track. When cutting a top track; make sure to make the cut a minimum 3 mm from a bore hole or cut out on the upper side of the top track. Maximum load per section is 200 kg. Do not store too much on each interior product and distribute the weight evenly across the system. Ensure the material and condition of the wall. Specifications Measurement – 641 x 8 x 36mm Package Content 1 x Top track http://www.completestoragesolutions.com.au/wp-content/uploads/2021/09/Elfa-Click-in-top-hang.mp4 Want to buy now, pay later & have it in your hands quick ? You can use our payment options of either afterpay, latitudepay, humm or zip pay & get it sorted today!
